Reinigen · Panel-Level Correction

Power-factor and harmonic correction for a single panel.

A wall-mounted unit for 480 V three-phase panels and switchboards. It measures continuously and corrects reactive power, harmonics and load imbalance, responding in under 50 microseconds.

Rent One for Six Months Ask Which Unit Fits

Reinigen power-quality unit: a wall-mounted cabinet with a small touchscreen and a specifications label

What it does

Dynamic reactive compensation
Harmonic mitigation
Load-unbalance correction
Intelligent digital control
High-speed response, under 50 µs
Power factor adjustable from −1.0 to +1.0

Performance

Accentz rates Reinigen to raise power factor to 0.98–0.99 and to cut line current by up to 20%, which lowers I²R losses and heat.

Measured at one distribution facility’s main switchboard: average power factor from 0.87 to 1.00, and reactive power from 101 kVAR to 3.

See the meter data

Where it fits

480 V three-phase panels and switchboards feeding motors, compressors, pumps, chillers, HVAC or drives. For a whole service carrying 150 kW or more, MPTS may be the better fit.

Compare with MPTS How many units would your panel take? Which Unit Fits

Installation

Your own licensed electrician installs Reinigen on the panel, to the National Electrical Code and local code. Nothing about your existing equipment has to change.

A Reinigen unit mounted on the wall beside a facility’s main switchgear — Reinigen installed on the wall beside a facility’s main switchgear.

Reinigen touchscreen showing grid-current and load-current tables with power factor and RMS amps — The unit’s own display, July 2026. Grid side: 0.99 power factor on every row, while the load it serves runs at 0.74 to 0.88. The grid supplies 9% to 23% less current than the load draws.

Specifications

Electrical

Model: RGN-480V/50-60HZ/3PH/120KVAR
System: 480 VAC, three-phase, 4-wire, 50–60 Hz
Compensation: 60–120 kVAR, plus harmonic mitigation
Maximum input current: 160 A
Short-circuit current rating: 35 kA RMS symmetrical at 480 V
Conductors: Copper only
Capacity: Modular; expandable through parallel connection

Protection

Protection: Over-voltage, under-voltage, reverse and over-compensation

Monitoring & communication

Display: Touchscreen with grid-side and load-side current and power factor
Ports: RS-485 and Ethernet (RJ45)
Protocols: Modbus RTU and Modbus TCP/IP

Environment & mounting

Operating temperature: −50°F to 104°F (indoor unit)
Cooling: Forced air
Enclosure: NEMA 12
Mounting: Wall, rack or cabinet
Dimensions: 24 × 30 × 10 in
Weight: 133 lb

Specifications from the Accentz, Inc. product label and data sheet.